Face Fix Hangers

MFM, MFT & HWT

  • test

The TECO Face Fix Range of Joist Hangers are designed for applications where additional strength is required or where access to the top of the timber or steel is not available. This range can be nailed or bolted. All values are given based on all nail holes being used, for bolting values please refer to the bolt manufacturers guidelines.

  • Multi Functional Face Fix Hangers - MFM & MFTRead More
  • Specifications
    • MFM – 1.2mm & MFT – 2mm thick
    • Location tabs aid fast accurate alignment of the hanger
    • M12 bolt holes
    • 85mm bearing
    • Galvanised steel EN 10346 DX51D Z275
    • The MFT is tested by Lucideon Ltd
    Installation

    The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation


  • Heavy Face Fix Hanger No Tag - HWTNT Read More
  • Specifications
    • All hangers come up to 150mm deep
      M10 & M12 bolt holes for added versatility
    • 95mm bearing
    • Versatile design enables specials to be ordered in a variety of depths and widths
    • Available in standard (HWTNT) or with concealed flanges (HWTI)
    • Galvanised steel to EN 10346 DX51D Z275
    • Grade 1.4301 austenitic stainless steel to EN 10088-2(available on selected products – please see table)
    Installation

    The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation


  • Heavy Face Fix Hanger Concealed Flange - HWTIRead More
  • Specifications
    • All hangers come up to 150mm deep
      M10 & M12 bolt holes for added versatility
    • 95mm bearing
    • Versatile design enables specials to be ordered in a variety of depths and widths
    • Available in standard (HWTNT) or with concealed flanges (HWTI)
    • Galvanised steel to EN 10346 DX51D Z275
    • Grade 1.4301 austenitic stainless steel to EN 10088-2(available on selected products – please see table)
    Installation

    The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation


The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
We're out of the office at the moment but please don't hesitate to send us an email and we will respond as soon as possible. For our opening times, please see our Contact Us page.
Our operators are busy. Please try again later or feel free to email sales@tecoproducts.co.uk
:
:
:

The data collected by this form is used to get in touch with you. For more information, please check out our privacy policy
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad