sales@tecoproducts.co.uk | 01273 423983
Timber Frame Ties

Timber Frame Ties

TFT

Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height.

Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter. 

  • Product List
  • Features
  • Specification
  • Installation

Drag left to right to view table contents.

CodeProduct
Product Dimensions (mm)
Tie WidthTie Length
Cavity Width (mm)
Stainless Steel to BSEN 10088-2 grade 1.4301 (Grade 304)
TFT50Timber Frame Tie 50mm1913050 to 74
TFT75Timber Frame Tie 75mm1915575 to 99
TFT100Timber Frame Tie 100mm19180100 to 120
• Complies with a DD140 Type 6 tie.
• Tested by CERAM Research Ltd.
• Meets with the appropriate parts of NHBC standards.
• Supplied with nails included.
• Grade 1.4301 austenitic stainless steel to EN 10088-2.
• Complies with a DD140 Type 6 tie.
• Tested by Ceram Research.
• Meets with the appropriate parts of NHBC standards.
• Complete with annular ring shank nails.

• Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre.