sales@tecoproducts.co.uk | 01273 423983
Heavy Edge Rolled

Heavy Edge Rolled

ER

The ER Strap has rolled edges along the entire strap making it feel substantial for those that prefer a more traditional strap without the full cost. In tests the TECO ER Strap performed equally as well as or better than the equivalent traditional 5mm Heavy Duty Strap, providing lateral restraint of roof trusses, rafter and joists tied to masonry. Designed to The Building Regulations BS 5268 Part 3 and other building standard for lateral restraint. 

  • Product List
  • Features
  • Specification
  • Installation

Drag left to right to view table contents.

CodeProduct
Product Dimensions (mm)
Overall length including bendLength of bend
Pre Galvanised - 2.4mm
ER600B100Edge Rolled Bent600100
ER600B150Edge Rolled Bent600150
ER1000B100Edge Rolled Bent1000100
ER1000B150Edge Rolled Bent1000150
ER1200B100Edge Rolled Bent1200100
ER1200B150Edge Rolled Bent1200150
ER1600B100Edge Rolled Bent1600100
ER1600B150Edge Rolled Bent1600150
ER1800B100Edge Rolled Bent1800100
ER1800B150Edge Rolled Bent1800150
ER2000B150Edge Rolled Bent2000150
CodeProduct
Product Dimensions (mm)
Overall lengthLength of bend or twist
Pre Galvanised - 2.4mm
ER600FEdge Rolled Flat600-
ER1000FEdge Rolled Flat1000-
ER1200FEdge Rolled Flat1200-
ER1400FEdge Rolled Flat1400-
ER1600FEdge Rolled Flat1600-
ER1800FEdge Rolled Flat1800-
CodeProduct
Product Dimensions (mm)
Overall length including twistLength of twist
Pre Galvanised - 2.4mm
ER600T100Edge Rolled Twisted600100
ER1000T100Edge Rolled Twisted1000100
ER1200T150Edge Rolled Twisted1200150
ER1600T150Edge Rolled Twisted1600150
ER1800T100Edge Rolled Twisted1800100
• Lighter design makes it easier to handle.
• More cost effective when compared to the traditional Heavy Duty Strap.
• Available flat, bent or twisted.
• 2.5mm thick rolled to 5mm.
• 30mm wide.
• Holed 6mm at 25mm offset centres.
• Galvanised steel EN 10346 DX51D Z275.
• Tested by CERAM Research Ltd Notification Body No.1289.
• Manufactured to EN 845-1:2013.

• When used as a lateral restraint; use min 6 No. 4x75mm round wire nails or equivalent fixed to timber joists/rafters.