sales@tecoproducts.co.uk | 01273 423983
Herringbone Joist Struts

Herringbone Joist Struts

HB

Herringbone Joist Struts provide the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins.

  • Product List
  • Features
  • Specification
  • Installation

Drag left to right to view table contents.

CodeProductJoist CentresStrut Length (mm)
Pre Galvanised - 1mm
HB400Herringbone Joist Strut400480
HB450Herringbone Joist Strut450523
HB600Herringbone Joist Strut600680
Stainless Steel - 1mm
HBSS400Herringbone Joist Strut400480
HBSS450Herringbone Joist Strut450523
HBSS600Herringbone Joist Strut600680
• Galvanised steel EN 10346 DX51D Z275.
• Grade 1.4301 austenitic stainless steel to EN 10088-2.
• All corners are rounded.

HB
• Galvanised steel EN 10346 DX51D Z275.

HBSS
• Grade 1.4301 austenitic stainless steel to EN 10088-2.
• Meets bracing requirements for long span domestic floors.
• In the interest of safety all corners are rounded.

• Generally required in the centre of the span when floor joists exceed 2.5 metres.
• Where spans exceed 4.5 metres two rows will be required at 1/3 and 2/3 of span.
• The design is such that only three sizes are needed to suit all standard nominal joist centres.
• Only two fixings per end are required.
• Holes should be nailed using 30 x 3.75 square twist nails or equivalent screws.
• Nail using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.