sales@tecoproducts.co.uk | 01273 423983
Expanded Metal Lath Sheet

Expanded Metal Lath Sheet

EML8x2 & EMLS8x2

Expanded Metal Lathing is mainly used as a key for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended Stainless Steel should be used. 

  • Product List
  • Features
  • Specification
  • Installation

Drag left to right to view table contents.

CodeProduct
Product Dimensions (mm)
WidthLength
Square Metre m2
Pre Galvanised Mild Steel
EML8X2EML Sheet68524381.67
Stainless Steel
EMLS8X2EML Sheet70025001.75
EML8x2
• Galvanised Steel EN 10346 DX51D Z275.

EMLS8x2
• Grade 1.4301 Austenitic Stainless Steel to EN 10088-2.

Fixing of Expanded Metal Lathing Sheets
• Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.

Timber Support
• To connect to timber use plasterer’s nails, screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight. Ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless products.

Metal Support
• To fix to steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a 'hairpin' shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.

To Solid Background
• Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and large diameter headed screw/nail that will keep the sheets firmly in place.

• Gloves should be warn as edges will be sharp.
• Refer to diagram on literature sheet for recommended fixing spacing and overlap.